Before & After Photos

A common issue in many homes is interior doors that no longer close properly, have poor alignment, or lack proper hardware, leading to reduced privacy, noise transfer, and overall inconvenience. In this project in New Hartford, NY, the existing door opening required a full upgrade to ensure proper fit, smooth operation, and a clean, finished appearance suitable for everyday use.

We resolved the issue by professionally installing a customer-provided 30” x 80” solid core pine 6-panel interior door, configured as an inswing left-hand setup. The door was fitted with brushed nickel hinges and a lever handle for durability and a modern finish. We also performed precise carpentry work by cutting and installing the door handle, boring the latch opening with proper offset, and mortising the strike plate into the frame to ensure secure closure and flawless alignment.

To complete the project, the door was prepared and treated using a pre-stain wood conditioner, then finished with a dark stain to match the requested look, followed by three coats of satin polyurethane for durability and protection. The result is a solid, well-aligned interior door that operates smoothly, enhances the room’s appearance, and provides long-lasting functionality and visual appeal.

This attic was experiencing energy loss due to outdated fiberglass insulation, air leaks around fixtures and penetrations, and improper ventilation. These conditions often lead to drafts, inconsistent indoor temperatures, and increased heating and cooling costs, especially during extreme seasonal changes in Whitesboro, NY.

To resolve this, we removed all existing fiberglass insulation and used a professional process to fully air seal critical areas, including light fixtures, plumbing penetrations, and around the chimney. We improved airflow by installing proper ventilation and soffit air intake, then added insulation dams along the catwalk for protection and structure. The catwalk itself was upgraded with 4" rigid foam board and topped with OSB for durable, accessible storage, while the area beneath was dense-packed with cellulose for complete coverage. We also removed the whole home vent fan and attic hatch, along with the attic vent fan, and restored the space by patching, sanding, texturing, and painting the affected drywall areas.

The attic was finished with 14" of blown-in cellulose insulation to achieve an R49 rating, ensuring consistent thermal performance. Materials used included cellulose insulation, rigid foam board, OSB, air sealing foam and caulk, ventilation components, and insulation dams—resulting in a properly sealed, well-ventilated attic designed for improved comfort, efficiency, and long-term performance, with adjustments made to exclude insulation in the garage area.

In this project, we upgraded an older gas or electric water heater that was no longer operating efficiently to a modern, energy-efficient 50-gallon Bradford White hybrid heat pump water heater. The goal was to improve overall energy performance, reduce utility costs, and provide a more reliable and sustainable hot water system for the home in Utica, NY.

We began by safely removing and disposing of the existing unit. A new dedicated 10/3 electrical circuit was then installed, running approximately 30 feet from the main panel to properly support the new system’s power requirements. The new heat pump water heater was installed and fully connected to the home’s existing hot and cold water lines, along with a condensate pump and drain line tied into an approved laundry sink or P-trap system to ensure proper drainage and operation.

The result is a high-efficiency hot water solution that delivers consistent performance while significantly reducing energy consumption. This upgrade improves comfort, lowers operating costs, and brings the home up to a more modern and efficient standard.

This attic in New Hartford, NY was underperforming due to aging insulation, air leaks, and poor ventilation (common issues that lead to heat loss, drafts, and rising energy costs). We found unsealed penetrations, gaps around the attic hatch, and exposed rim joists allowing conditioned air to escape, along with airflow problems that can contribute to moisture buildup and winter issues like ice dams.

To address this, we completed a full attic upgrade starting with insulation removal using our CoolVac machine to expose all problem areas. We then performed comprehensive air sealing throughout the attic, including key areas like the living room closet, window, and hatch. Ventilation was improved by installing baffles and properly venting the bath fan and furnace intake to the exterior. We also added insulation damming around access points and sealed the rim joists using closed-cell spray foam to eliminate critical air infiltration.

The attic was finished with R49 blown-in cellulose insulation to ensure consistent, high-performance coverage. Using materials such as cellulose insulation, vent baffles, spray foam, caulk sealants, Schedule 40 PVC, a bath fan hard pipe and wall vent duct kit, and 1/2" plywood, the result is a tightly sealed, properly ventilated attic that enhances comfort, improves energy efficiency, and supports long-term home performance.

The homeowner in Herkimer, NY needed a stronger and more reliable electrical service to safely power a new heat pump water heater while ensuring the home's electrical system could accommodate future energy demands.

Our team installed a new 200-amp electrical service and upgraded the electrical panel, replacing outdated equipment with a modern system designed for improved performance and safety. Using specialized electrical tools including a multimeter, voltage tester, wire strippers, cable cutters, torque drivers, and professional installation equipment, we completed the upgrade according to current electrical standards and code requirements.

The new panel provides the capacity needed to operate the heat pump water heater efficiently without overloading existing circuits. Careful wiring, breaker installation, and service connections helped create a clean, organized, and dependable electrical distribution system that will serve the home for years to come.

As a result, the homeowner now benefits from a safer, more reliable 200-amp electrical service, increased electrical capacity, and peace of mind knowing their home is prepared for both current needs and future upgrades. The completed installation supports efficient operation of the new heat pump water heater while improving the overall functionality and value of the property.