Before & After Photos

Our client living in Saint-Mathias-Sur-Richelieu, Quebec was dealing with ice dams forming on their roof during winter time. After seeing our posts on social media, they reached out to us for a permanent solution. During the free inspection, our specialist noticed that the existing insulation within the attic was insufficient and that there was excess moisture in the attic. To address the issue, our team began by removing the old insulation, before sealing all air leaks throughout the attic. We also installed vents along the soffits to restore proper ventilation, and then we blew in over 16 inches of our TruSoft cellulose insulation to reach a thermal value of R60. Result? A properly insulated attic and a comfortable living area.

Our client in Boloeil had concerns about their attic. During the inspection, our specialist noticed excessive and uncomfortable heat, as well as damage to the existing insulation.

The specialist identified that this overheating was primarily due to air leaks coming from various sources, including around the chimney, recessed lighting, and through cable and pipe passages. These same air leaks also cause significant heat loss, resulting in a drop in indoor temperature during winter. This phenomenon increases the demand on heating and cooling systems, leading to higher energy costs.

Our solution involved removing the damaged insulation, thoroughly sealing all air leakage points, and installing new, high-performance insulation.

The client expressed complete satisfaction with the results, as well as with the professionalism of our team throughout the process.

In Otterburn Park, a client contacted us as he facing problems within his attic. In fact, he had fiberglass placed within his attic, but he was not getting the needed results. Upon inspection, our specialist explained that the fiberglass were not well placed: The problematic area were not covered, which was affecting the insulation's performance. In addition, the quantity of fiberglass installed was not adequate to reach the thermal value of R60. 

As a solution, we removed the existing insulation, which started to rot due to excess moisture. Then, we made sure all the air leaks were sealed in order to maximize the insulation's performance. And lastly, we blew in about 17 inches of our TruSoft cellulose insulation to reach the suitable thermal value. 

Nous avons reçu un appel d’un propriétaire résident à Saint-Antoine-Sur-Richelieu, Québec qui souhaitait inspecter son grenier après qu'il a remarqué la présence de quelques tâches noires sur le bois dans le grenier. L’un de nos spécialistes certifiés a visité afin de procéder à une inspection complète. Les tâches noires étaient de la moisissure ; signe d'une humidité excessive dans le grenier, et des infiltrations d'air.

Pour y remédier une fois pour toute, notre équipe a procédé au colmatage des fuites d’air, à la decontamination des spores de moisissure avec notre produit Mold-X2 et à l’ajout de 17 pouces de cellulose soufflée TruSoft, permettant d’atteindre une valeur isolante de R60. La transformation fut radicale, au sein du grenier et même dans la maison.

We received a call from a homeowner in Saint-Antoine-Sur-Richelieu, Quebec, who wanted to have their attic inspected after noticing some black stains on the wooden ceiling. One of our specialists visited the home to carry out a thorough inspection. The black spores turned out to be mold ; a clear sign of excessive humidity in the attic and air infiltration issues.

To resolve the problem once and for all, our team sealed all air leaks using ZypFoam, decontaminated the mold spores using our Mold-X2 treatment, and added 17 inches of TruSoft blown-in cellulose insulation, achieving an R60 insulation value. The transformation was dramatic, both in the attic and throughout the entire home.